Go directly to: DTV-200 Series of Modular SDI products

Go directly to: AES-2200 6 Channel, AES/EBU, Digital Audio Fiber Optic Multiplexer

Go directly to: DTV-100 Series of Stand-Alone SDI products

Go directly to: DV-1394 Firewire Fiber Optic Transport

DTV-200 Series of
Serial Digital Video Distribution for DTV

• Designed to ease the engineering and financial difficulties associated with the migration to DTV.

View more information on DTV-200 in PDF format here

Specifications: Input: Type: 1 BNC. Impedance: 75 Ohms. Return Loss: >18dB up to 270MHz. Output: Type: 4 BNC. Return Loss: >18dB up to 270MHz.

DTV-201 Serial Digital Video Fanout DA 1x4 for the UTIL-200-FIBER Tray.

Specifications: Input: Type: 1 BNC. Impedance: 75 Ohms. Return Loss: >18dB up to 270MHz. Output: Type: 8 BNC. Return Loss: >18dB up to 270MHz.

DTV-202 Serial Digital Video Fanout DA 1x8 for the UTIL-200 Tray.

Specifications: Input: Type: 1 BNC. Impedance: 75 Ohms. Return Loss: >18dB up to 270MHz. Output: Type: up to 8 BNC. Return Loss: >18dB up to 270MHz. Data rate selection: Automatic or Manual.

DTV-210 Automatic Standard Reclocking DA, 1 BNC input, 8 BNC outputs for the UTIL-200 Serial Digital Video and Analog DA Tray.

DTV-210F Automatic Standard Reclocking DA, 1 BNC input, 4 BNC outputs for the UTIL-200-FIBER Serial Digital Video & Fiber Optic Transport Tray.

• Designed to ease the engineering and financial difficulties associated with the migration to DTV.
• An economical solution for the fiber optic transport of virtually any digital signal from 143 to 400 Mbps.
• Supported standards include SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 Component, DVB-ASI (270Mb/s), Sonet/SDH and ATM. Models DTV-220 and DTV230.
• For data rates from 19.4 to 540 Mbps, see the data sheet for the DTV-225 and DTV-235 series.
• Jitter less than 130psec peak-peak at 270 Mbps.
• Mix SDI Fan-out, SDI Re-clocking and SDI Fiber Optic Transport in the UTIL-200-FIBER Utility Tray.
• Now support Analog Video, Analog Audio, Serial Digital Video and Digital Audio in the same tray.
• The UTIL-200-DVM Tray supports the DVM-2200 Video, 6 Audio and 3 Data Transport Cards, the DTV-220/230 SDI Transport Cards, the DTV-201/210F SDI Fan-out and Reclocking Cards, the DAM-2200 6 Audio and 3 Data Transport Cards and the AES-2200 6 AES/EBU and 3 Data Transport Cards.
• The standard power supply PS-200-AC has a universal input voltage range from 85 to 265 VAC. No need to set voltage selector switches; simply plug in and forget. The 48 VDC power supply PS-200-48VDC has an input voltage range from 36 to 60 VDC. Ideal for Telephone Company central office applications.
• Coarse Wave-division Multiplexing (CWDM) systems are available for up to 16 wavelengths over ONE optical fiber.
• Two redundant power supplies with external alarm relay contacts and front panel LED indicators for each power supply are included. Each module has an open collector status output alarm.
• Designed and manufactured in the U. S. A.

DTV-230-FTX and DTV-230-FRX Serial Digital Video Singlemode
Fiber Optic Transmitter and Receiver Modules

Specifications: Fiber Input: Type: ST or FC. Wavelength: 1100 to 1600nm. Sensitivity: -28 dBm. Output: Type: 2 BNC. Return loss: >18dB up to 270MHz.

• One coaxial input, one Fiber Optic output.
• Economical solution for the transport of digital signals up to 360 Mbps over Multimode fiber optic cables.
• Up to a 10 dBm optical budget at a wavelength of 1310nm.
• Supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 Component.

Specifications: Input: Type: 1 BNC. Impedance: 75 Ohms. Return Loss: >18dB up to 270MHz. Fiber Output: Type: ST. Wavelength: 1330 Multimode, Power: -14 dBm typical.

DTV-220-FRX Serial Digital Video Multimode Fiber Optic Receiver and DA

• One Fiber Optic input and two coaxial outputs.
• Used with the DTV-220-FTX.

Specifications: Fiber Input: Type: ST or FC. Wavelength: 1100 to 1600nm. Sensitivity: -24 dBm typical. Output: Type: 2 BNC. Return loss: >18dB up to 270MHz.

View more information on DTV-220 and DTV-230 143Mbps - 400Mbps SDI Fiber Transport in PDF format here

View more information on DTV-225 and DTV-235 19.4Mbps - 540Mbps SDI Fiber Transport in PDF format here

AES-2200
6 Channel, AES/EBU, Digital Audio Fiber Optic Multiplexer
(Preliminary)

· Supports 6 AES/EBU digital audio channels (12 mono) and 4 Simplex RS232, RS422 or RS485 data channels over one optical fiber.
· System supports up to 6 AES/EBU 75 Ohm Un-balanced and up to 3 AES/EBU 110 Ohm Balanced signals.
· Supports up to 96 KHz sampling rates.
· Audio and Optical front panel status indicators with dry alarm relay contacts.
· Modular configurations with all optical wavelengths, LED Multimode and Laser Single-mode.
· Coarse Wave-division Multiplexing (CWDM) systems are available for up to 8 wavelengths over ONE optical fiber.
· Optical budget of up to 30 dB for Single-mode.
· Universal AC operation for 85-265 VAC and Telco DC operation for 48 VDC.
· Now support analog video, analog audio, serial digital video and digital audio in the same tray. The UTIL-200-DVM Tray supports the DVM-2200 Video, 6 Audio and 3 Data Transport Cards, the DTV-220/230 SDI Transport Cards, the DTV-201/210F SDI Fan-out and Reclocking Cards, the DAM-2200 6 Audio and 3 Data Transport Cards and the AES-2200 6 AES/EBU and 3 Data Transport Cards.
· Applications include links from studio to transmitter (STL), studio to studio, studio to CATV head-end, common carrier, RBOC Telco circuits, distance learning, Intelligent Transportation Systems & back-haul feeds from special events.

View more information on AES-2200 in PDF format here

DTV-100 Series
Serial Digital Video Fiber Optic Transport for DTV

• Designed to ease the engineering and financial difficulties associated with the migration to DTV.
• An economical solution for the fiber optic and coaxial transport of virtually any digital signal from DC to 400Mbps.
• Supported standards include SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 Component, 360 Mbps, Sonet/SDH and ATM.
• Units to support Fiber Optic Transport, Fanout Distribution and Re-clocking are avalaible.
• The system is available stand-alone or rack-mount for Multimode and Singlemode applications.
• The units operate from 110 or 220 VAC using a wall-mount supply or from 12 VDC from a BP-90 battery.
• Applications include links from studio to transmitter (STL), studio to studio, studio to CATV head-end, distance learning, field and sporting production and back-haul feeds.
• Designed and manufactured in the U. S. A.

Ordering Information:

FIBER OPTICS, 270 Mbps Serial Digital Transport for DTV:

DTV-120-FTX-ST, 270 Mbps Serial Digital Video Fiber Optic Transmitter, 1310nm Multi-mode LED with ST connector, Stand-alone & Rack-mountable, wall-mount power supply included.

DTV-120-FRX-ST, 270 Mbps Serial Digital Video Fiber Optic Receiver Multi-mode with ST connector, Stand-alone & Rack-mountable, wall-mount power supply included.

FIBER OPTICS, 400 Mbps Serial Digital Transport for DTV:

DTV-130-FTX-50-ST or FC, 400 Mbps Serial Digital Video Fiber Optic Transmitter, 1300nm Single-mode Laser -11 dBm with ST connector, Stand-alone & Rack-mountable, wall-mount power supply included.

DTV-130-FTX-51-ST or FC, as above with 1300nm Single-mode Laser -8 dBm with FC connector
DTV-130-FTX-52-ST or FC, as above with 1300nm Single-mode Laser -3 dBm with FC connector
DTV-130-FTX-53-ST or FC, as above with 1300nm Single-mode Laser +0 dBm with FC connector
DTV-130-FTX-54-ST or FC, as above with 1300nm Single-mode Laser +2 dBm with FC connector
DTV-130-FTX-6-ST or FC, as above with 1550nm Single-mode Laser 0 dBm with FC connector
DTV-130-FRX-ST or FC, 400 Mbps Serial Digital Video Fiber Optic Receiver, 1100 to 1600nm Single-mode with FC connector, Stand-alone Rack-mountable, wall-mount power supply included.

Synchrinization, Re-clocking and Fan-out DAs

DTV-110, 400 Mbps Automatic Standard Reclocking DA w/ cable EQ , Stand-alone & Rack-mountable, wall-mount power supply .

Rack-mount Kits and Accessories

RM6, 6 unit rack-mounting kit, mount 6 DTV-100/1500 in 1 rack unit

BLANK, Blank panel for rack-mounting kit
WDM-95-MM, Wave Division Multiplexer, 850 and 1300nm Multi-mode
WDM-95-SM, Wave Division Multiplexer, 1300 nm and 1550 nm Single Mode
SPLIT50/50, Optical Splitter, 50/50 Gould

View more information on DTV-100 in PDF format here

DV-1394

Firewire, IEEE 1394A/B, Fiber Optic Transport

• The DV1394 system provides high quality transmission of compressed video over long distances conforming to the Firewire IEEE 1394A/B protocol.
• Using a IEEE 1394 PHY and an optical transceiver, the DV1394 is capable of sending IEEE 1394 Firewire signals across a fiber optic cable up to 1 KM.
• Multimode and Singlemode system are available for ONE and TWO fibers with LC or MTRJ connectors.
• Adapters for ST, FC and SC connectors are available.
• Full duplex data is supported at 100 and 200 Mbps. 400 Mbps support available soon.

View more information on DV-1394 in PDF format here

Click Here to Request Product Information