Electro-optical Switcher, OEO

The second type is the Electro-optical switch.  The Electro-optical switch uses a hybrid approach.  The input is Optical, the cross-point is Electrical and the output is Optical. The abbreviation for this technology is OEO.  An OEO switch supports point to multi-point or multicast switching.  Any input can be switched to every output if necessary.  Since the optical signal is converted to electrical, only one wavelength can be switched at a time.  Also an electrical cross-point only operates in one direction.  Therefore only one wavelength in one direction is supported.  MultiDyne provides a wide array of Electro-optical Fiber Routing Switchers scalable from 16 by 16 up to 288 by 288 matrix sizes.  Electro-optical routing switchers can switch any digital opticsl signal type from DVI Dual Link, Audio and Data to analog video and RGB-HV.  The EOS-4000 is the only large scale routing switcher that can support DVI Dual Link up to 2560 by 1600 or WQXGA.  When combined with the DVI-6000 DVI Dual Link and RGB-HV Fiber Optic Transport Systems, the EOS-4000 Series of Electro-Optical Fiber Routing Switchers will support all your DVI and RGB-HV signal distribution needs.

Electro-optical Switcher, Fiber Optic Routing Switchers, Fiber Optic Transport Systems for Broadcast Television 2560 by 1600, 2560 x 1600, component, dual link, DVI, dvi etender, dvi extender, dvi fiber extender, dvi fiber extener, dvi fiber link, dvi fiber optic, dvi over fiber, DVI-6000, dvi-d, dvi-i, DVI-ONE, electro, electro-optical, EOS-400, extender, fiber, graphics, high, Jim Jachetta, optic, optical, resolution, rgb, rgb-hv, routing, switch, vga, video, wqxga, YPbPr